Double Alpha Academy DAA Alpha-X / Race Master Insert Block Assembly (Magnetisch), Pistolenmodell: Para Ordnance, Bild 1 von 3

Double Alpha Academy DAA Alpha-X / Race Master Insert Block Assembly (Magnetisch), Pistolenmodell: Para Ordnance

81,31 €

Frei erwerbbar (ab 18 Jahren)

50197 Zaragoza, Spanien

ID: 10618626

Kauf von außerhalb der EU: Die Waffe geht über einen Importeur in deinem Land, der Händler kümmert sich um die Ausfuhr. So läuft der Kauf aus Europa ab

Sicher kaufen mit Gunfinder

Unsere KI-gestützte Identitätsprüfung der Anbieter macht Gunfinder zum sichersten Marktplatz online. Mehr erfahren

Über den Verkäufer

Shooting Zaragoza

Händler

102.501 Angebote

Details

Originalsprache

Spanisch

Kategorie

Zustand

Neu

Standort

🇪🇸 50197 Zaragoza, Spanien

Verfügbarkeit

lieferbar

Aktualität

Dieses Angebot basiert auf einer Angebotsspiegelung, bei der die Angebotsdaten von einem Shop, Händler oder externen Marktplatz zu uns übertragen wurden. Bitte beachte, dass aufgrund möglicher Verzögerung bei der Datenübertragung vorübergehende Preisabweichungen auftreten können.

Quelle: Shooting Zaragoza
Zuletzt aktualisiert: vor einem Tag

Beschreibung

Hinweis: Der Artikelstandort befindet sich im Ausland. Bitte beachte, dass sich dadurch Lieferbedingungen, Versandzeiten und/oder das Kaufverfahren unterscheiden können.

Comprehensive Guide to DAA Alpha-X / Race Master Insert Block Assembly

The Race Master / Alpha-X Holster utilizes an efficient and easy system to allow shooters to switch their holster from one gun type to another by means of changing the Insert Block Assembly. This switch is fast and easy and can be done in less than a minute, and without losing any of the holster’s adjustments or settings.

The Insert Block Assembly includes:

The Locking Block (gun specific).

The Sliding Lock, assembled (gun specific).

The safety lever, assembled.

The internal magnetic activation system, assembled.

“Magnetic logo” to cover over side hole in holsters which may still have it.

The Insert block grips the pistol only on the front end of the trigger guard, and a very precise fit is required in that area. In some cases, some light modifications to the Insert Block may be required.

Should you need to dismantle your insert block for some fitting, follow these steps:

Remove the insert block from the holster by removing the two small M4 screws from the back of the holster.

Using a punch and hammer, push the two steel pins from the front of the block towards the back (push from the side with the gun type engraved). These pins may be tight.

Once the pins are out, the plastic wedge holding the 2nd magnet will come out. Make sure the magnet does not fall out of the part. It is usually held snugly in its pocket.

Use a marker to make a dot on the top of the magnet which is embedded in the slide lock. This will make it easy for you to ensure that you reassemble it with the correct side up. Most likely it will fall out or you will want to remove it while fitting the slide lock.

To remove the slide lock from the block, unscrew the M3 screw visible from the back of the block – and then slide the slide lock upwards and out through the window in the block – passed the safety lever, which must be in the unlocked position.

To reassemble, reverse your steps.

The Race Master / Alpha-X Holster Insert Blocks are designed to be used in either RH or LH holsters. The same insert works for both.

Color: Black

* Trigger guard of CZ TS Czechmate very similar to that of the SP01, just a hair thicker.

Starting from 2017 year, the CZ TS Czechmate now uses the same frame as the CZ TS Orange. Note the thinner squarer trigger guard. A customer with this new model needs a TS Orange insert, (NOT a TS Czechmate insert), even though his gun is a CZ TS Czechmate.

Drucken

Double Alpha Academy DAA Alpha-X / Race Master Insert Block Assembly (Magnetisch), Pistolenmodell: Para Ordnance

Shooting Zaragoza

Details

Aktualität

Beschreibung

Ähnliche Angebote