Achtung: Dein Browser ist veraltet. Beachte bitte, dass Gunfinder daher an manchen Stellen nicht funktionieren wird. Du solltest deinen Browser sobald es geht aktualisieren. Hier erfährst du mehr!

ASE Utra S Series SL7i Schalldämpfer

≈ 497 €
Preis beim Händler: £415. Umgerechnet zum EZB-Kurs vom 13. November 2026.
Erwerbsscheinpflichtig
DE14 1LJ Burton upon Trent, Vereinigtes Königreich
0
ID: 11962313
Kauf von außerhalb der EU: Die Waffe geht über einen Importeur in deinem Land, der Händler kümmert sich um die Ausfuhr. So läuft der Kauf aus Europa ab
Sicher kaufen mit Gunfinder
Unsere KI-gestützte Identitätsprüfung der Anbieter macht Gunfinder zum sichersten Marktplatz online. Mehr erfahren
Über den Verkäufer
Livens
Händler

Details

Originalsprache
Englisch
Marke
Ase Utra
Produkt
Ase Utra SL7i
Kategorie
Erwerbsberechtigung
Erforderlich - Was darf ich kaufen?
Zustand
Neu
Standort
🇬🇧 DE14 1LJ Burton upon Trent, Vereinigtes Königreich
Verfügbarkeit
lieferbar

Aktualität

Dieses Angebot basiert auf einer Angebotsspiegelung, bei der die Angebotsdaten von einem Shop, Händler oder externen Marktplatz zu uns übertragen wurden. Bitte beachte, dass aufgrund möglicher Verzögerung bei der Datenübertragung vorübergehende Preisabweichungen auftreten können.
Quelle
Livens
Zuletzt beim Händler geprüft
vor etwa 17 Stunden

Beschreibung

Hinweis: Der Artikelstandort befindet sich im Ausland. Bitte beachte, dass sich dadurch Lieferbedingungen, Versandzeiten und/oder das Kaufverfahren unterscheiden können.
ASE Utra S Series SL7i Sound Moderator – Stainless Steel Rifle Suppressor for .308 Win, .223, .25 & 6.5mm

If you’ve been running a lightweight aluminium moderator and watching it wear out after a few hundred rounds, you already know the problem. The ASE Utra SL7i was built for the opposite kind of shooter — the one who puts serious round counts downrange and expects the kit to hold up.

Manufactured by ASE Utra in Finland, the SL7i is a fully welded, 300 series stainless steel suppressor designed for .308 Win, .223, .25 cal and 6.5mm rifles. It’s the updated, lightened evolution of the original S7 — same tough construction, less weight on the end of your barrel.

What It Actually Does

The SL7i delivers 30–33 dB of sound reduction measured 1 metre left of the muzzle on .308 Win. That’s not “Hollywood quiet” — no centrefire moderator is — but it’s enough to take the sharp crack out of a .308 and bring it down to a level where you’re not reaching for ear defenders every time you squeeze the trigger.

Shooters who run the SL7i on .308 and .243 consistently describe it as very quiet for its class, with one long-term user noting that ASE moderators are “very well made and if used a lot will still last for years”. Another put it simply: “Heavy, yes, but stainless steel and appear very well made”.

The Welded Stainless Steel Difference

Here’s where the SL7i separates itself from the lightweight crowd. The entire suppressor is assembled by welding — no glued baffles, no pressed fittings, no rubber O-rings that degrade and start leaking gas. That fully welded construction is why these moderators have a reputation for outliving the rifles they’re mounted on. One forum member summed it up: “Heat haze can be a real issue off the SL series, but they’ll literally last forever”.

The 300 series stainless steel body handles heat and repeated firing without losing structural integrity. If you’re a range shooter putting hundreds of rounds through a 6.5 Creedmoor in a session, or a hunter who wants a moderator that won’t need replacing in three seasons, this is the build quality that matters.

Compact Enough to Keep Your Rifle Handling Right

At 162mm overall length with just 147mm added to your barrel, and a diameter of 44.5–45mm, the SL7i keeps a slim profile that won’t turn your hunting rifle into a fence post. Weight ranges from 465–590g across the calibre options.

Yes, it’s heavier than a titanium can. No, that’s not a design flaw — it’s a trade-off. You’re trading a few hundred grams for a suppressor that won’t erode, won’t loosen, and won’t need replacing. For stalking and hunting, the weight sits close enough to the muzzle that it actually helps steady the rifle rather than making it feel nose-heavy.

Calibre Options and Thread Mounting

The SL7i covers a broad range:

.308 Win — the classic UK deer calibre

.223 Rem — for vermin and range work

.25 cal — including .25-06 and similar

6.5mm — 6.5 Creedmoor, 6.5×55, 6.5 PRC

Direct thread mounting options are available for multiple barrel configurations, so you can fit it straight to a threaded barrel without needing a muzzle brake adapter.

Finish Options

The SL7i comes in either a blasted stainless steel finish — which looks like exactly what it is, a no-nonsense piece of engineering — or a black Cerakote coating for a lower-profile look that resists corrosion and reflection in the field.

The Bottom Line

The ASE Utra SL7i isn’t the lightest moderator on the market. It’s not the cheapest either. What it is, is one of the most durable, consistent and genuinely effective stainless steel suppressors you can put on a .308 or 6.5mm rifle. If you want a moderator that’ll still be doing its job in ten years — through range sessions, wet days on the hill and everything in between — this is the one to buy.

Manufactured in Finland by ASE Utra. Available in .308 Win, .223, .25 and 6.5mm. Direct thread mounting. Blasted stainless or black Cerakote finish.

Specifications

Specification
Detail

Calibre Options
.308 Win, .223, .25, 6.5mm

Weight
465–590 g

Overall Length
162 mm

Added Barrel Length
147 mm

Diameter
44.5–45 mm

Sound Reduction
30–33 dB (.308 Win, measured 1 m left of muzzle)

Material
300 Series Stainless Steel

Construction
Fully Welded

Finish
Stainless Steel 

Mounting
Direct Thread

Country of Manufacture
Finland

Ähnliche Angebote