Achtung: Dein Browser ist veraltet. Beachte bitte, dass Gunfinder daher an manchen Stellen nicht funktionieren wird. Du solltest deinen Browser sobald es geht aktualisieren. Hier erfährst du mehr!

Atlas Zweibein BT81 Lil Brandi

≈ 72 €
Preis beim Händler: £60,45. Umgerechnet zum EZB-Kurs vom 13. November 2026.
Frei erwerbbar (ab 18 Jahren)
DE14 1LJ Burton upon Trent, Vereinigtes Königreich
0
ID: 11964193
Kauf von außerhalb der EU: Die Waffe geht über einen Importeur in deinem Land, der Händler kümmert sich um die Ausfuhr. So läuft der Kauf aus Europa ab
Sicher kaufen mit Gunfinder
Unsere KI-gestützte Identitätsprüfung der Anbieter macht Gunfinder zum sichersten Marktplatz online. Mehr erfahren
Über den Verkäufer
Livens
Händler

Details

Originalsprache
Englisch
Kategorie
Zustand
Neu
Standort
🇬🇧 DE14 1LJ Burton upon Trent, Vereinigtes Königreich
Verfügbarkeit
lieferbar

Aktualität

Dieses Angebot basiert auf einer Angebotsspiegelung, bei der die Angebotsdaten von einem Shop, Händler oder externen Marktplatz zu uns übertragen wurden. Bitte beachte, dass aufgrund möglicher Verzögerung bei der Datenübertragung vorübergehende Preisabweichungen auftreten können.
Quelle
Livens
Zuletzt beim Händler geprüft
vor etwa 22 Stunden

Beschreibung

Hinweis: Der Artikelstandort befindet sich im Ausland. Bitte beachte, dass sich dadurch Lieferbedingungen, Versandzeiten und/oder das Kaufverfahren unterscheiden können.
Atlas Bipod BT81 Lil Brandi

The Atlas Bipod BT81 Lil Brandi provides a solution for mounting a 1913 Picatinny Rail on a traditional rifle stock without the need for disassembly, drilling holes, or causing damage. Here are the key details and installation instructions:

Key Features:

Mounting Method: Attaches to the existing sling stud using a cross pin, set screw, and hex wrench.

Slots: Features 3 usable slots for attaching any rail-mounted Atlas Bipod.

Sling Attachment: Equipped with a sling attachment for optional sling use.

Contact with Stock: Angular wings with rubber pads ensure secure contact with the stock.

Material: Machined from 7075-T6 aluminum to Picatinny rail standards.

Finish: Mil-Spec Type III Class 2 finish for durability.

Installation: No disassembly required. Patent Pending.

Compatibility: Not intended for use with flat stocks; suitable for traditional rifle stocks.

Dimensions and Weight:

Dimensions: 1.95 x 1.5 x 0.663 inches

Weight: 0.89 ounces

Installation Instructions (BT81):

Ensure the firearm is not loaded.

Verify that the sling stud is tight in the stock.

(Optional) Consider removing the sling stud, applying epoxy to threads, replacing, and tightening as per epoxy instructions.

Check the BT81 fit to the stock by placing it over the front sling stud with the smooth face towards the muzzle. Verify if the rubber pads are contacting the stock. Add additional rubber material if needed.

Do not use the BT81 if the rubber pads do not contact the stock, as it may cause damage.

Remove the BT81 and place the included 1/8 x 1/2” dowel pin into the rifle’s sling stud hole.

Carefully place the BT81 back onto the stock with the smooth face towards the muzzle, aligning the ends of the dowel pin with the .530 circular relief hole.

Press the BT81 against the stock and pull it down towards the buttstock. The dowel pin should engage the angular slot in the BT81 body.

Tighten the installed dog-tipped set screw with the included hex wrench to snug the BT81 to the rifle stock. Check tension regularly and avoid over-tightening.

Verify the BT81 is tight before each use, as settling might occur. Retighten as needed.

To remove the BT81, remove the set screw completely. Then, with a soft blow, non-marring mallet, gently tap on the end closest to the buttstock, moving it towards the muzzle.

The BT81 Lil’ Brandi offers a practical and secure solution for adding a Picatinny Rail to traditional rifle stocks with minimal installation effort and without compromising the stock’s integrity.

Ähnliche Angebote