Achtung: Dein Browser ist veraltet. Beachte bitte, dass Gunfinder daher an manchen Stellen nicht funktionieren wird. Du solltest deinen Browser sobald es geht aktualisieren. Hier erfährst du mehr!

DONNYFL SHOGUN Größe 30 Schalldämpfer – .25 CALIBRE 1/2X20UNF

≈ 222 €
Preis beim Händler: £184,99. Umgerechnet zum EZB-Kurs vom 16. November 2026.
Erwerbsscheinpflichtig
DE14 1LJ Burton upon Trent, Vereinigtes Königreich
0
ID: 11964949
Dieses Angebot ist aktuell nicht lieferbar.
Kauf von außerhalb der EU: Die Waffe geht über einen Importeur in deinem Land, der Händler kümmert sich um die Ausfuhr. So läuft der Kauf aus Europa ab
Sicher kaufen mit Gunfinder
Unsere KI-gestützte Identitätsprüfung der Anbieter macht Gunfinder zum sichersten Marktplatz online. Mehr erfahren
Über den Verkäufer
Livens
Händler

Details

Originalsprache
Englisch
Kategorie
Erwerbsberechtigung
Erforderlich - Was darf ich kaufen?
Zustand
Neu
Standort
🇬🇧 DE14 1LJ Burton upon Trent, Vereinigtes Königreich
Verfügbarkeit
nicht lieferbar

Aktualität

Dieses Angebot basiert auf einer Angebotsspiegelung, bei der die Angebotsdaten von einem Shop, Händler oder externen Marktplatz zu uns übertragen wurden. Bitte beachte, dass aufgrund möglicher Verzögerung bei der Datenübertragung vorübergehende Preisabweichungen auftreten können.
Quelle
Livens
Zuletzt beim Händler geprüft
vor etwa 23 Stunden

Beschreibung

Hinweis: Der Artikelstandort befindet sich im Ausland. Bitte beachte, dass sich dadurch Lieferbedingungen, Versandzeiten und/oder das Kaufverfahren unterscheiden können.
DONNYFL SHOGUN SIZE 30 SILENCER – .25 CALIBRE 1/2X20UNF

 

DonnyFL

PRODUCT DESCRIPTION

If you thought Sumo was quiet wait until you hear Shogun. Shogun is just like Sumo but 1.5 inches longer. DonnyFL added an additional 1 inch chamber as well as increase the first expansion chamber by .5 inches and the chamber by the exit hole another .5 inches. This design is very effective.

Available in .25 and .30 calibres

1/2 x 20 UNF threaded end cap

Mono-core design to increase accuracy and limit the chances of pellet clipping

No moving parts or epoxy that may become loose after 1000s of rounds

Precision CNCd by professional machinist

Sand blasted and anodized for maximum durability

Take apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No silly hex key or torch needed when you want to perform maintenance inside the unit.

Customizable, you can further dampen the sound by wrapping the interior tube with different sound absorbing materials.

Comes pre-wrapped in felt

Machined grooves on the outside for easy handling.

Weight 7.2 oz

*Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings.

*Airgun use only

As Donny FL moderators screw onto the shroud of your FX Airgun, DonnyFL would recommend going a size up when choosing your moderator. For example, if youre looking for a .177 DonnyFL would recommend using a .22. or if youre looking .25, you should opt for a .30

Ähnliche Angebote