Achtung: Dein Browser ist veraltet. Beachte bitte, dass Gunfinder daher an manchen Stellen nicht funktionieren wird. Du solltest deinen Browser sobald es geht aktualisieren. Hier erfährst du mehr!

Bore Tech Chameleon Gel Tube 2oz

≈ 29 €
Preis beim Händler: £24,50. Umgerechnet zum EZB-Kurs vom 16. November 2026.
Frei erwerbbar (ab 18 Jahren)
DE14 1LJ Burton upon Trent, Vereinigtes Königreich
0
ID: 11965783
Kauf von außerhalb der EU: Die Waffe geht über einen Importeur in deinem Land, der Händler kümmert sich um die Ausfuhr. So läuft der Kauf aus Europa ab
Sicher kaufen mit Gunfinder
Unsere KI-gestützte Identitätsprüfung der Anbieter macht Gunfinder zum sichersten Marktplatz online. Mehr erfahren
Über den Verkäufer
Livens
Händler

Details

Originalsprache
Englisch
Kategorie
Zustand
Neu
Standort
🇬🇧 DE14 1LJ Burton upon Trent, Vereinigtes Königreich
Verfügbarkeit
lieferbar

Aktualität

Dieses Angebot basiert auf einer Angebotsspiegelung, bei der die Angebotsdaten von einem Shop, Händler oder externen Marktplatz zu uns übertragen wurden. Bitte beachte, dass aufgrund möglicher Verzögerung bei der Datenübertragung vorübergehende Preisabweichungen auftreten können.
Quelle
Livens
Zuletzt beim Händler geprüft
vor etwa 23 Stunden

Beschreibung

Hinweis: Der Artikelstandort befindet sich im Ausland. Bitte beachte, dass sich dadurch Lieferbedingungen, Versandzeiten und/oder das Kaufverfahren unterscheiden können.
Bore Tech Chameleon Gel Tube (2 oz)

 

FEATURES & SPECIFICATIONS

Bore Tech’s Chameleon Gel™ is a patented, high-tech, colour-indicating cleaner and polish that effectively removes severe Carbon, Copper, Lead and Moly fouling. This patented chemical and mechanical cleaning technology is odour free, biodegradable and 100% safe for all barrel types. The easy to use gel formulation requires no mixing and cleans up quickly for a shiny barrel every time. Available in a 2oz tube.

 

CHAMELEON GEL IS RECOMMENDED FOR

Extremely Fouled Bores
Lightly Polishing Bore

Carbon Fouling in Throat Area
Stubborn Copper Fouling

 

CHAMELEON GEL IS 100%

BARREL SAFE
NON-HAZARDOUS
AMMONIA FREE

ODOUR FREE
BIODEGRADABLE
USER-FRIENDLY

 

Traditional abrasive bore pastes solely rely on aluminium oxide grit and mechanical abrasion to remove fouling. Complicating matters, this decades-old technology turns black whether the barrel is copper fouled, carbon fouled or 100% clean. Shooters have no indication of their bore condition and in turn overuse the traditional bore pastes damaging their barrel. Not with Chameleon Gel!

Chameleon Gel safely cleans fouling in half the time of traditional abrasive bore pastes by utilizing a micron-sized, silica-based polish that creates an activation site for the patented chemical technology to quickly and effectively clean. It also changes colours to show what type of fouling is in the bore and when the bore is clean.

If you want to quickly, effectively and safely clean and polish your barrels, Bore Tech’s Chameleon Gel is the cutting edge cleaner/polish you have been looking for.

Are your firearms clean? Bore Tech Chameleon Gel will sure let you know!

 

Bore Tech Chameleon Gel™ Use Instructions

 

UNLOAD FIREARM

Wet 3 to 4 patches with C4 Carbon Remover or Cu+2 Copper Remover or Eliminator Bore Cleaner and individually push through the bore to remove loose fouling.

Next, using the correct calibre Bore Tech Proof-Positive jag and undersized Bore Tech X Count patches or an undersized Bore Tech Proof-Positive Nylon brush with a patch wrapped around it, evenly coat the patch with Chameleon Gel.

Short stroke the bore with the coated patches back and forth in 2-inch increments focusing on problematic areas

Observe colour (s) of the patch to indicate fouling type in the barrel:

Blue/Green = Copper Fouling

Black = Carbon Fouling

Gray = Lead/Moly

White = Clean Bore

 

6. Let Chameleon Gel remain in barrel for 3 – 5 minutes.

7. Repeat above steps as necessary. When the Chameleon Gel remains white in colour, bore is clean.

8. To Remove Chameleon Gel, individually push 2 to 3 wet patches of C4 Carbon Remover, Cu+2 Copper Remover or Eliminator Bore Cleaner through the bore.

9. Finally, push dry patches through the bore until they come out clean.

10. For storage or in adverse conditions apply Bore Tech Friction Guard XP Gun Oil.

11. Before using the firearm, always run a dry patch through the bore. This will remove any residue and ensure against obstructions.

Ähnliche Angebote