Achtung: Dein Browser ist veraltet. Beachte bitte, dass Gunfinder daher an manchen Stellen nicht funktionieren wird. Du solltest deinen Browser sobald es geht aktualisieren. Hier erfährst du mehr!

Hornady ungezündete 300 PRC Messinghülsen

≈ 82 €
Preis beim Händler: £68,50. Umgerechnet zum EZB-Kurs vom 13. November 2026.
Frei erwerbbar (ab 18 Jahren)
DE14 1LJ Burton upon Trent, Vereinigtes Königreich
0
ID: 11966004
Kauf von außerhalb der EU: Die Waffe geht über einen Importeur in deinem Land, der Händler kümmert sich um die Ausfuhr. So läuft der Kauf aus Europa ab
Sicher kaufen mit Gunfinder
Unsere KI-gestützte Identitätsprüfung der Anbieter macht Gunfinder zum sichersten Marktplatz online. Mehr erfahren
Über den Verkäufer
Livens
Händler

Details

Originalsprache
Englisch
Marke
Hornady
Kategorie
Kaliber
.300PRC
Zustand
Neu
Standort
🇬🇧 DE14 1LJ Burton upon Trent, Vereinigtes Königreich
Verfügbarkeit
lieferbar

Aktualität

Dieses Angebot basiert auf einer Angebotsspiegelung, bei der die Angebotsdaten von einem Shop, Händler oder externen Marktplatz zu uns übertragen wurden. Bitte beachte, dass aufgrund möglicher Verzögerung bei der Datenübertragung vorübergehende Preisabweichungen auftreten können.
Quelle
Livens
Zuletzt beim Händler geprüft
vor etwa 21 Stunden

Beschreibung

Hinweis: Der Artikelstandort befindet sich im Ausland. Bitte beachte, dass sich dadurch Lieferbedingungen, Versandzeiten und/oder das Kaufverfahren unterscheiden können.
Hornady Unprimed 300 PRC Brass Cases

 

Details

Firstly, Hornady produces brass with the same precision, attention to detail and focus on perfection. They measure their brass for consistent wall concentricity. Aswell, tests are given to pressure calibration to ensure uniform case expansion and hand-inspects each piece.

This dedication to quality ensures proper seating of the bullet both in the case and in the chamber and consistent charges and pressures. The result is optimal velocity and repeatable accuracy from your cartridges. New, unprimed brass. This is not loaded ammunition.

 

Brass Preparation:

With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder.  These imperfections occur in the final tumbling wash operation after the case mouth has been annealed.

Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur.  Minor dents are normally removed in the first firing and will not affect case life or performance.

On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color.  With some smaller caliber cases you may notice the case mouths to be slightly belled.

 

Instructions

With all new rifle brass, you should first straighten out the case and case mouth

Chamfer and debur the case mouth inside and out.

To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass.  T

o prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.

Ähnliche Angebote